18
IE-LGR-UxxxxM-23
U0141M, U0141TM, U0141G, U0141TG
Four-channel thermometer
for external probes
These devices measure up to four temperatures from
external probes of the Pt1000 series. The response to
a temperature change depends on the connected probe
design but it is usually many times faster than a model
with an internal sensor. It is often used to monitor places
where only probes are introduced, when the device itself
is not directly in the measured area. The maximum
cable length of each probe should not exceed 15 m.
The use of shielded cables is strongly recommended.
The U0141M, U0141G
models have a high degree of
IP67 protection and probes with the connector
(Pt1000/E) can be connected to them. To maintain the
IP rating, the unused probe connectors should be
provided with a supplied closing cap.
The U0141TM, U0141TG
models have a low degree
of protection IP20. The connectorless probes Pt1000/0
series are intended to these models. This type of device
has not a protection against the ingress of water or dust.
Do not use device at places where such conditions can
be expected.
The probes are connected to the pluggable terminal
block.
Connection:
The procedure for connecting the wires to the terminals
can be found in
U0141M
U0141G
U0141TM
U0141TG
Summary of Contents for U0110G
