IE-LGR-UxxxxM-23
49
Response time:
Is determined by the response time of the used probe (it
valid if Measuring interval is set to 1 s).
Display resolution:
0.1 °C
Recommended calibration interval:
2 years
U0141M, U0141TM, U0141G, U0141TG
_______________
Measured values:
4 x temperature sensed by an external COMET
Pt1000/E series probe
Temperature range:
(-20
0 to +260) °C, Pt1000/3850 ppm sensor
Measuring current: approx. 0.5 mA with pulses of
approx. 60 ms length
Input accuracy (without probes):
±0.2 °C in a range of (-200 to +100) °C
±0.2 % of the measurement value in a range of (+100
to +260)
°C
The accuracy of the device with a temperature probe
connected to it is determined by the above input
accuracy and the accuracy of the probe employed.
Connection:
Two-wire connection with the possibility of compensation
the error caused by the resistance of the cable wires.
The recommended length of the probes is up to 15 m,
the length must not exceed 30 m. It is strongly
recommended to use shielded cables.
For the
U0141M (U0141G)
model are intended
Pt1000/E series probes ended with a 3-pin M8 ELKA
3008V connector. The connection of the connector is
shown in
For the
U0141TM (U0141TG)
model are intended
Pt1000/0 series probes without a connector. They are
connected to a pluggable terminal block, max. wire
cross-section: 1.5 mm2.
Response time:
Is determined by the response time of the used probe (it
valid if Measuring interval is set to 1 s).
Display resolution:
0.1 °C
Recommended calibration interval:
2 years
Summary of Contents for U0110G
