IE-LGR-UxxxxM-23
67
Annex 3: Accuracy of the dew-point temperature
measurement
Annex 4: Connecting the wires to the terminals
Some inputs are equipped with a split self-
locking WAGO connector block.
Connect
the wires to the block with either
the supplied SP013 or a screwdriver
corresponding
to
the size:
insert
a screwdriver into the pluggable terminal
block’s angular opening situated above
the circular opening. Open the connector
by turning the screwdriver moderately,
insert the wire and close the connector by
subsequent disengaging the screwdriver.
See the illustration.
The pluggable terminal block can be taken
out of the device without the necessity
of disconnecting any wire.
Summary of Contents for U0110G
