Comdial Conversip EPI00G-I12, User Manual

Page: 98 / 140

Other Advanced Features
98 Comdial Feb ‘05
7.9.7 MUTING YOUR ENDPOINT
By using the MUTE button, you can block transmission of your voice
to the distant party. You can do this whether you are using the
handset or the speaker.
To mute your endpoint, press
MUTE . The system turns the mute
function and light on. You can still hear the distant party, but they
cannot hear you.
To speak to the distant party, press MUTE again. The system turns
the mute function and light off.
7.10 Changing the Default Volume
Control
You can set a permanent loudness level for any volume control
setting. The level remains at this volume (referred to as the default
setting) until you change the setting.
To set a permanent speaker, headset, handset, or group listening
loudness for all future calls,
1. Press INTERCOM .
2. Activate the speaker, headset, handset, or group listen mode to
be affected.
3. While in that mode, press VOLUME Up or VOLUME Down
button to adjust loudness.
4. Dial **7 or press programmed SAVE button to hold the loud-
ness at the last setting for all future calls (until you change the
default again).
5. Repeat this procedure in each mode until you have set all
default volume levels.