Comdial Conversip EPI00G-I12, User Manual

Page: 26 / 140

Overview
26 Comdial Feb ‘05
Note : If you set the ringer to the OFF position, your endpoint sounds
a short ring burst once for each call you receive at your station.
To set the speaker and handset
loudness levels, perform the fol-
lowing steps.
1. Press the INTERCOM but-
ton.
2. Press the VOLUME UP or
VOLUME DOWN button
once for each change in
speaker volume that you
desire.
3. Select SAVE.
4. Lift the handset.
5. Press the
VOLUME UP or VOLUME DOWN button once for
each change in handset volume that you desire.
6. Select SAVE .
Note : When a call ends, the system resets the speaker and handset
volume of all future calls to the programmed setting. For instructions
in setting your EP100G-L12/EP100G-I12’s default volume, see Sec-
tion 7.9, Volume Control.
1.5 Answering and Making Calls
Your EP100G-L12/EP100G-I12 is now properly configured to
answer and make calls to both endpoints within your system
(intercom calls) and outside lines. Remember that when dialing an
outside number, you must first select a line to connect your system to
the local exchange.
When you hear outside ringing (long bursts), press the flashing line
button and speak toward the endpoint (or lift the handset if you desire
privacy).