Comdial Conversip EPI00G-I12, User Manual

Page: 45 / 140

EP100G-L12 / EP100G-I12 User
Feb ‘05 Comdial 45
To store a number while you are on a call (if available), perform the
following steps.
1. Press the programmed SAVE NUMBER REDIAL button twice
(the display prompts you to dial a number).
2. Dial the number that you wish to save (the system immediately
saves the number for later redial; it does not dial it over the line
you are on now).
To redial the saved number, perform the following steps.
1. Press a line button to select a line.
2. Press the programmed
SAVE NUMBER REDIAL button (the
system automatically dials the number that you saved earlier).
3.5 Camping On - Busy Station,
Automatic Callback
If you call another station and receive a busy signal or a Do Not
Disturb tone, you can press a button that causes the system to ring
your endpoint when the station is available. This is called camping
on at a station. Please note that you can camp on to only one station
at a time.
To camp on at any busy station,
select
CAMP On . Your endpoint
immediately hangs up. When the
station becomes available, your
endpoint rings with five short tone
bursts.
When you hear five short tone
bursts, press
INTERCOM or select
Answer . The other endpoint then
starts ringing.
Note : If you do not press INTER-
COM after the ring back tones sound within the time limit set by the
installer, the system cancels the call back.