Comdial Conversip EPI00G-I12, User Manual, Page: 82 / 140

Programming
82 Comdial Feb ‘05
To set a reminder alert at your endpoint, perform the following steps.
1. Select OPTIONS .
2. Select Programming .
3. Select NEXT until the Reminder
Alert option appears.
4. Select Reminder Alert .
5. Select Reminder Alert 1 or
Reminder Alert 2 to select an
available alert designation; if
you have already programmed
an alert for 1, select 2 to set a
second alert condition.
6. Dial the reminder time using the numbers on the dial pad
(remember to add a zero [0] before single digit times: 01 for
one o’clock, 02 for 2 o’clock, etc.)
7. Toggle the interactive button
between AM or PM .
8. Select the Reminder Alert inter-
active button to select ON .
9. Select EXIT .
When an alert sounds at the set time,
you hear four short tone bursts, which
continue until you act upon them. If
you are not at your station to hear the
alert when it sounds, your endpoint’s
ring tone changes to the alert tone for every incoming call until you
respond to the alert.