Cloos NexT 452 AC, Operating Instructions Manual

Page: 51 / 234

51
Once the setting ranges have been configured and activated, the message
"LIMIT" appears in the "MAIN" menu, see Figure 18.
6.4.3 Deactivating the setting ranges
Select the "Progr" function from the "MAIN" page. Use the arrow keys to
select the appropriate start, main or end crater power. The display shows
the "Setting range" function.
After activating the "Setting range" function, the following view appears.
Display Zugangsverwaltung Optionen
Puls 4 -Takt
V
0
A 1.2 mm Fe
82% Argon 18% Co
2
0.0
Zugangsverwaltung - Optionen
Bedienlevel > > Automatik < <
Schweissen freigeben
Job aufrufen freigeben
Handrad Leist/Fein freigeben
Job speichern sperren
Figure 17. "Config" - "Access management" - "Options" menu
Synergie
Betriebsart
Verfahren
Funktion
M A I N
Program-
mieren
Messwerte
Anzeige

Normal 2-Takt
Dyn.
4.6
m / min
-2
7
V
0
A
1.2 mm Fe
92% Argon 8% CO
2
0.0
LIMIT
4.0
-10
-5
6.0
10
5
Figure 18. Activated setting ranges
Stellbereiche
Puls 4 -Takt
V
0
A
1.2 mm Fe
82% Argon 18% Co
2
0.0
S T E L L B E R E I C H
Hauptleistung
Aus
Max
Min
Stell-
bereich
Aus
Dyn.
Aus
Max
Min
Max
Min
- 10
15
Aus
Aus
In der Serienversion werden Min und Max
getauscht !! Max oben Stellbereich Aus
Figure 19. "Programming" - "Setting range" menu