manualshive.com logo in svg

Cloos NexT 452 AC, Operating Instructions Manual

Share
Download
Cloos NexT 452 AC Operating Instructions Manual Download Page 185

185

8.4  Inserting the welding wire

Stab injury!

In the case of an incorrect handling of the welding torch during the wire 
feeding process, the wire transport may cause stab injuries on hand, eyes 
or the face. 

•  During the wire feeding, you should always keep the welding torch in 

a position turned away from the body! 

•  Please take care that the current tip is removed from the torch.

Isolate the welding power source from the power supply before you start 
the change.

To obtain a perfect welding result, adapt the wire drive rollers, the liner 

and the current tip to the component to be welded and the used welding 
wire and diameter.

8.4.1 QWD-M4

The illustrations may differ from the original.

WARNING!

CAUTION!

INFO!

2

1

3

The wire inlet must not touch 
the wire drive roller.

INFO!

INFO!

Summary of Contents for NexT 452 AC











































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands