Cloos NexT 452 AC, Operating Instructions Manual

Page: 104 / 234

104
MAIN (2) - Data backup
Load jobs sequentially
Use the function "from file" to select the beginning of the list, e. g. Job 1.
Now select the end of the list by means of the middle rotary knob, e. g.
Job 7 and press the function "to file".
Press the "Load" button. The jobs marked in the list are written to the job
memory of the welding power source.
12.2 Data backup Config
12.2.1 Save configuration data to the storage medium
Shows all existing configuration files. Press the "Save Config" button to
save the files to the storage medium. After a successful saving, the cor-
responding configuration file is marked with a green tick. If a file was
skipped, a white line appears at the respective position. If a file could not
be transferred, a red X line appears at the respective position.
Datensicherung Konfig Qineo NexT
V1.03.xx
Lade von
USB
Speichern
Speichere
auf USB
Laden
Datensicherung - Konfig
Puls 4 -Takt
V
0
A
1.2 mm Fe
82% Argon 18% Co
2
0.0
Figure 95. "Data backup" - "Config" menu
Datensicherung Konfig Qineo NexT
V1.03.xx
Speichere
Konfig
Konfig > Memory Card
Puls 4 -Takt
V
0
A
1.2 mm Fe
82% Argon 18% Co
2
0.0
Konfigurationsdateien
1. …………………
2. …………………
3. …………………
4. …………………
5. …………………
6. …………………
Figure 96. "Data backup" - "Save config on storage medium" menu