CLIVET WSAN-YMi 101, Instruction Manual For Installation, Use And Maintenance

Page: 102 / 128

Reset the WLAN setting using the interface.
Select MENU> WLAN SETUP> RESTORE WLAN
SETTINGS.
Press OK.
The following page is displayed:
Use LEFT RIGHT to move to YES.
Press OK to restore the WLAN setting.
At this point, the wireless configuration has been restored.
PA Mode is available for wireless connection at the mobile
device level.
The APP must be installed.
Scan the following QR code to install the Smart
Home APP or
Search for MSmartLife in the APP store or
GOOGLE PLAY to install the APP.
1. Log in / register
Click on the + button on the right on the home page,
register the account following the instructions in the guide.
Adding home equipment.
1. Choose the control unit model, then add the device
2. Configure the control unit following APP instructions.
3. Wait for the home appliance to connect, then click on
COMPLETE.
4. When the home appliance is connected, the WiFi icon of
the control unit always remains on and it is possible to
control the air conditioner via the APP.
5. If the network connection process fails or if you need to re
-establish and replace the mobile connection, factory
reset the WLAN on the control unit and then repeat the
previous procedure.
WARNING
Troubleshooting for networking failures.

When connecting the product to the network, make sure that the phone is in close proximity to the product.

Currently only routers with 2.4 GHz band are supported.

We do not recommend using special characters (punctuation marks, spaces, etc.) in the name of the WLAN.

It is preferable not to connect more than 10 devices to a single router since home appliances are affected by weak or unstable
signals.

If you change the password of the router or WLAN, delete all the settings and reset the appliances.

The contents of the APP may undergo changes as a result of version updates and in this case this will be based on actual
operation.