CLIVET WSAN-YMi 101, Instruction Manual For Installation, Use And Maintenance, Page: 60 / 128

Code State Default Min max
setting
interval
unit
15.1 CN12 ON/OFF
Define the CN12 port,0= REMOTE ON/OFF,1= TBH ON/OFF
2= AHS ON/OFF
0 0 1 1 /
15.2 SMART GRID
Enable or disable the SMART GRID. 0=NON
；
1=YES
0 0 1 1 /
15.3 T1b (Tw2)
Enable or disable the T1b (Tw2)
0=NON,1=YES
0 0 1 1 /
15.4 Tbt1
Enable or disable the Tbt1;
0=NON,1=YES
0 0 1 1 /
15.6 Ta
Enable or disable the Ta;
0=NON,1=YES
0 0 1 1 /
15.7 Ta-adj The corrected value of Ta on wired controller -2 -10 1 1 °C
15.8 SOLAR INPUT
Choose the SOLAR INPUT;
0=NON,1=CN18Tsolar,2=CN11SL1SL2
0 0 2 1 /
15.9 F-PIPE LENGTH
Choose the total length of the liquid pipe(F-PIPE
LENGTH);
0 0 1 1 /
15.10 RT/Ta_PCB
Enable or disable the RT/Ta_PCB;
0=NON,1=YES
0 0 1 1 /
15.11 PUMPI SILENT MODE Enable or disable PUMPI SILENT MODE 0=NON, 1=YES 0 0 1 1 /
16.1 PER_START Start-up percentage of multiple units 10 10 100 10 %
16.2 TIME_ADJUST Adjustment time of adding and subtracting units 10 0 60 1 MIN
16.3 ADDRESS RESET Reset the address code of the unit FF
FF
+0
-F 1 /
17.1 HMI SET
Choose the HMI;
0=MASTER,1=SLAVE
0 0 1 1 /
17.2
HMI ADDRESS FOR
BMS
Set the HMI address code for BMS 0 0 15