CLIVET WSAN-YMi 101, Instruction Manual For Installation, Use And Maintenance, Page: 59 / 128

* Hour
：
the present time (not on the hour +1,on the hour +2) Minute:00
Code State Default Min max
setting
interval
unit
7.1 dT1_IBH_ON
The temperature difference betw een T1S and T1 for
starting the backup heater.
5 2 10 1 °C
7.2 t_IBH_DELAY
The time that the compressor has run before the first
backup heater turns on
30 15 120 5 MIN
7.3 T4_IBH_ON The ambient temperature for starting the backup heater -5 -15 30 1 °C
7.4 dT1_AHS_ON
The temperature difference between T1S and TW2 for
turning the additional heating source on
5 2 10 1 °C
7.5 t_AHS_DELAY
The time that the compressor has run before starting the
additional heating source
30 5 120 5 MIN
7.6 T4_AHS_ON
The ambient temperature for starting the additional
heating source
-5 -15 30 1
°C
7.7 IBH_LOCATE
IBH/AHS installation location PIPE LOOP=0; BUFFER
TANK=1
0 0 0 0
°C
7.8 P_IBH1 Power input of IBH1 0 0 20 0.5 kW
7.9 P_IBH2 Power input of IBH2 0 0 20 0.5 kW
7.10 P_TBH Power input of TBH 2 0 20 0.5 kW
8.1 T1S_H.A_H
The target outlet w ater temperature for space heating
w hen in holiday aw ay mode
25 20 25 1 °C
8.2 T5S_H.A_DHW
The target outlet w ater temperature for domestic hot
w ater heating w hen in holiday aw ay mode
25 20 25 1 °C
12.1
PREHEATING FOR
FLOOR T1S
The setting temperature of outlet w ater during first
preheating for floor
25 25 35 1 ℃
12.3 t_FIRSTFH The time last for preheating floor 72 48 96 12 HOUR
12.4 t_DRYUP The day for w arming up during floor drying up 8 4 15 1 DAY
12.5 t_HIGHPEAK The continue days in high temperature during floor drying up 5 3 7 1 DAY
12.6 t_DRYD The day of dropping temperature during floor drying up 5 4 15 1 DAY
12.7 T_DRYPEAK
The target peak temperature of w ater flow during floor
drying up
45 30 55 1 ℃
12.8 START TIME The start time of floor drying up * 0:00 23:30 1/30 h/min
12.9 START DATE The start date of floor drying up
The
present
date
1-1-
2000
31-12-
2099
1-1-
2001
d/m/y
13.1
AUTO RESTART
COOL/HEAT MODE
Enable or disable the auto restart cooloing/heating mode.
0=NON
，
1=YES
1 0 1 1 /
13.2
AUTO RESTART DHW
MODE
Enable or disable the auto restart DHW mode. 0=NON
，
1=YES
1 0 1 1 /
14.1
POWER INPUT
LIMITATION
The type of power input limitation, 0=NON, 1~8=TYPE 1~8 0 0 8 1 /