CLIVET WSAN-YMi 101, Instruction Manual For Installation, Use And Maintenance, Page: 97 / 128

INFORMATION

The remote control does not accept commands when
holiday away mode is active (ON).

Unit disinfecting is completed at 23:00 on the last day, if
the related function is activated.

When the Holiday away mode is active, the previously set
climatic curves are invalid and will automatically take
effect at the end of the set away Holiday period.

The default temperature is not valid when Holiday away
mode is active, but the default value still appears on the
main page.
The holiday at home function allows you to apply changes to
normal schedules without having to change them when you
spend your holidays at home,
If Holiday at home mode is active, the home icon appears on
the home page.
Select MENU> OPTIONS> HOLIDAY AT HOME
Press OK.
The following page is displayed:
Use ON-OFF to select active (ON) or disabled (OFF) and use
LEFT RIGHT UP DOWN to scroll and adjust.
If CURRENT STATUS is deactivated (OFF), HOLIDAY AT
HOME is deactivated (OFF).
If CURRENT STATUS is active (ON), HOLIDAY HOME is
activated (ON).
Use UP DOWN to adjust the date.

Before and after the holiday, normal schedule will be
active.

During the holiday, you save energy and prevent the
house from freezing.
INFORMATION
It is necessary to restore Holiday away or Holiday at home if
the operating mode of the unit is changed.
The function allows you to force activation of the backup
heater.
Go to MENU > OPTIONS > BACKUP HEATER.
Press OK.
If IBH and AHS are not set as valid by the DIP switch on the
main control panel of the hydraulic module, the following page
is displayed:
IBH: backup heater for indoor unit
AHS= Additional heating source
If IBH and AHS are set as valid, the following page is
displayed:
Use ON-OFF to select active (ON), deactivated (OFF)
INFORMATION

If automatic operation mode is set on the ambient heating
or cooling side, the backup heater function cannot be
selected.

The BACKUP HEAT function is not valid when only the
AMBIENT HEAT MODE is active.