CLIVET WSAN-YMi 101, Instruction Manual For Installation, Use And Maintenance, Page: 120 / 128

1011 T1
Total outlet temperature, unit: °C. Send value = actual value invalid value
0x7F
1012 T1B
Total water output of the system (after auxiliary heat source), unit: °C.
Send value = actual value invalid value 0x7F
1013 T2
Refrigerant liquid side temperature , unit: °C. Send value = actual value
invalid value 0x7F
1014 T2B
Temperature of refrigerant gas side , unit: °C. Send value = actual value
invalid value 0x7F
1015 T5 Water tank temperature invalid value 0x7F
1016 Ta Room temperature, unit: °C. Send value = actual value invalid value 0x7F
1017 Tbt1 Tbt1 , unit: °C. Send value = actual value invalid value 0x7F
1018 -- --
1019 Water flow Actual value *100 unit: M3/H
1020 model 10-18 : stands for 10-18KW ( valid for the second generation unit )
1021 Unit target frequency
1022 Unit version number
1~99 indicates the serial number of the whole machine, which refers to
the version number of the hydraulic module
1023 High calorific value
1024 Low calorific value
1025
Hydraulic module capacity
value
Actual value *100 unit: Kw
1026 Wind speed Fan speed, unit r/min . Send value = actual speed
1027 PMV opening
External machines electronic expansion valve opening degree , the unit:
P . Send value = actual value (only display multiples of 8 )
1028 T3 temperature
Condenser temperature, unit: °C. Send value = actual value invalid value
0x7F
1029 T4 temperature
Outdoor ambient temperature, unit: °C. Send value = actual value invalid
value 0x7F
1030 Exhaust gas temperature
Compressor discharge temperature Tp , unit: °C. Send value = actual
value invalid value 0x7F
1031 Return air temperature
Compressor return air temperature, unit: °C. Send value = actual value
invalid value 0x7F
1032 TF module temperature Unit (°C) ---- Invalid value of external feedback 0x7F
1033 Pressure value 1
High-pressure value of external machine, unit: kPA . Send value = true
value
1034 Pressure value 2
Low pressure value of external machine, unit: kPA . Sent value = true
value (reserved)
1035 DC bus current Unit: Ampere
1036 DC bus voltage Return value = actual value ( unit: volts)
1037 External current External unit running current, unit A , send value = actual value
1038 External voltage A voltage value outside the unit, unit: V . Send value = actual value
1039
External unit frequency limiting
scheme
Solution value ----- external unit feedback 174
1040 High battery value
1041 Low battery value
1042 Outdoor unit software version
The above table is the modbus mapping table information of slave 1
Unit from X ( 2-15 ) information from the mapping table unit 1 a (X-1) * 200