Clevo X7200 User Manual Download Page 238

Page: 238 / 286

Interface (Ports & Jacks)

A - 2 Interface (Ports & Jacks)

Ports and Jacks

Item

Description

Card Reader

The card reader allows you to use the following digital storage cards:

MMC (MultiMedia Card) / RSMMC

SD (Secure Digital) / Mini SD / SDHC /

SDXC

MS (Memory Stick) / MS Pro / MS Duo

Push the card into the slot and it will appear as a removable device.

Cable (CATV)

Antenna Jack

Use this jack to connect a CATV cable if you have included the

optional

Mini-PCI TV Tuner in

your purchase.

Consumer Infrared

Transceiver

The

consumer infrared

transceiver at the

front

of the computer allows the computer to

communicate with the remote control unit supplied with the

optional

Mini-PCI TV Tuner.

DC-In Jack

Plug the supplied AC/DC adapter into this jack to power your computer.

DVI-Out Port

The DVI-Out (

Digital Visual Interface

) Port is a video connector interface. This allows you to

connect an external monitor, TV or Flat Panel Display etc. as a display device

(see

“Configuring

an External Display using the NVIDIA Control Panel” on page B - 7

) by means of a DVI cable.

If you are using an older type of monitor you will need to use a converter to convert the signal
from DVI to VGA.

Summary of Contents for X7200































































































































































































































































































Search results

Summary of Contents for X7200

Reviews:

Related manuals for X7200

Brands by name

Popular brands

Clevo X7200, User Manual

Search results

Summary of Contents for X7200

Reviews:

Related manuals for X7200

Brands by name

Popular brands