Clevo X7200 User Manual Download Page 79

Page: 79 / 286

Power Management

Battery Information 3 - 11

Conserving Battery Power

• Use a

power plan

that conserves power (e.g

Power saver

), however note that

this may have an affect on computer performance.

• Lower the brightness level of the LCD display. The system will decrease LCD

brightness slightly to save power when it is not powered by the AC/DC adapter.

• Reduce the amount of time before the display is turned off.

• Close wireless, Bluetooth, modem or communication applications when they are

not being used.

• Disconnect/remove any unnecessary external devices e.g. USB devices,

ExpressCards etc.



Windows Mobility

Center

The

Windows Mobility

Center

control panel

provides an easy point
of access for information
on battery status, power
plans used and wireless
device status etc.

Figure 3 - 6

Windows Mobility

Center

Summary of Contents for X7200































































































































































































































































































Search results

Summary of Contents for X7200

Reviews:

Related manuals for X7200

Brands by name

Popular brands

Clevo X7200, User Manual

Search results

Summary of Contents for X7200

Reviews:

Related manuals for X7200

Brands by name

Popular brands