Clevo X7200 User Manual Download Page 240

Page: 240 / 286

Interface (Ports & Jacks)

A - 4 Interface (Ports & Jacks)

Mini-IEEE 1394b Port

This allows high-speed connection to various peripheral devices, e.g. external disk drives and
digital cameras (

see note below

RJ-45 LAN Jack

This port supports LAN (Network) functions.

Note

: Broadband (e.g. ADSL) modems usually connect to the LAN port.

S/PDIF-Out Jack

This S/PDIF (

Sony/Philips Digital Interface Format

) Out Port allows you to connect your DVD-

capable PC to a Dolby AC-3 compatible receiver for “5.1” or ‘dts’ surround sound.

Security Lock Slot

To prevent possible theft, a Kensington-type lock can be attached to this slot. Locks can be
purchased at any computer store.

Item

Description



IEEE 1394b

The Mini-IEEE 1394 ports only support

SELF POWERED

IEEE 1394 devices.

Summary of Contents for X7200































































































































































































































































































Search results

Summary of Contents for X7200

Reviews:

Related manuals for X7200

Brands by name

Popular brands

Clevo X7200, User Manual

Search results

Summary of Contents for X7200

Reviews:

Related manuals for X7200

Brands by name

Popular brands