Clevo X7200 User Manual Download Page 184

Page: 184 / 286

Modules

7 - 48 Bluetooth Module

3rd Party Bluetooth Combo Driver Installation

Note this driver is required only for the combo Bluetooth and WLAN module only.

Before installing the driver make sure the Bluetooth module is powered

(use

Fn + F12

key combination), then insert the

Device Drivers & Utili-

ties + User’s Manual

disc into the CD/DVD drive. If a

Found New Hard-

ware

window appears, click

Cancel

in all windows that appear, and then

proceed to install the driver as below.

Click

Option Drivers

(button).

3. Click

6.Install Combo BT Driver > Yes

4. Choose the language you prefer and click

5. Click

Next

6. Click the button to accept the license and click

Next

7. Click

Next > (select if you want to create an icon to appear on the desktop)

Next > Install

8. Click

Finish

9. The

My Bluetooth

icon will appear on the desktop and the

Bluetooth

item will be installed in the

Programs/All Programs

menu.

10. See overleaf for information on Bluetooth networking.



High Speed Bluetooth

Data Transfer

The

Combination Wire-

less LAN & V3.0 Blue-
tooth module

supports

high speed (V3.0) data
transfer. However to
achieve such transfer
speeds,

both devices

must support high
speed data transfer

To obtain high speed
(V3.0) data transfer
make sure that both the
WLAN and Bluetooth
modules are powered
on.

Check your Bluetooth
compatible device’s doc-
umentation to confirm it
supports high speed data
transfer.

Summary of Contents for X7200































































































































































































































































































Search results

Summary of Contents for X7200

Reviews:

Clevo X7200, User Manual, Page: 184 / 286

Search results

Summary of Contents for X7200

Reviews: