Clevo X7200 User Manual Download Page 144

Page: 144 / 286

Modules

7 - 8 Setting Up SATA RAID Mode

Intel Turbo Memory & Matrix Storage Setup and Driver Installation

Insert the

Device Drivers & Uti User’s Manual

disc into the CD/

DVD drive.

2. Click

Option Drivers

(button).

3. Click

4.Install TM&iMSM Driver > Yes

4. Click

Next > Next > Yes > Next

5. Click

Finish

to restart the computer.

The

Intel Matrix Storage Console

displays status information on your RAID con-

figuration. Run the

Intel® Matrix Storage Console

from the

Intel® Matrix Stor-

age Manager

in the Programs/All Programs menu. The

Intel

Matrix Storage

Manager

provides information on the RAID status.

Figure 7 - 3

Intel Matrix Storage

Console

(Basic & Advanced

Views)

Summary of Contents for X7200































































































































































































































































































Search results

Summary of Contents for X7200

Reviews:

Clevo X7200, User Manual, Page: 144 / 286

Search results

Summary of Contents for X7200

Reviews: