manualshive.com logo in svg

Clevo X7200, User Manual, Page: 110 / 286

Share
Download
Clevo X7200 User Manual Download Page 110

BIOS Utilities

5 - 12 Advanced Chipset Control Menu

5

Intel Virtualization Technology > Advanced Chipset Control

Intel(R) Virtualization Technology

 enables a CPU to act as if it were several CPUs

working in parallel in order to allow several operating systems to run at the same
time in the same machine.

Hyperthreading > Advanced Chipset Control

Hyperthreading

 activates additional CPU threads that may appear as additional pro-

cessors and is used to improve CPU multi-tasking. The operating system will view
a processor with 

Hyperthreading

 enabled as two virtual processors and will spread

any tasks between them (make sure your installed operating system supports multi-
ple processors, and preferably, is optimized for this technology). After enabling/dis-
abling 

Hyperthreading

, and saving and exiting the BIOS, the system will shut down

(press the power button to turn the system on again).

CPU C State > Advanced Chipset Control

Enable/Disable CPU C States (operating states) here.

Turbo Boost > Advanced Chipset Control

You can enable Turbo Boost to automatically run the processor core faster than the
stated frequency (within specification limits of the Thermal Design Power) for in-
creased performance.

Summary of Contents for X7200































































































































































































































































































Reviews:

No comments