6- 49
6-5 Bank Settings
Parameter name
Setting value
Remarks
Select bank storage (BNK.DAT)
Selects the settings to be read out from those stored in a bank.
ALL (All)
THRS (HIGH setting value, LOW setting value)
THRS.PR (HIGH setting value, LOW setting value, Preset value)
[Default: ALL]
Banks are storage areas. The settings in banks are not reflected on displays or in judgment values.
For this to happen, the relevant settings must be read out and placed in the work area.
Banks can only be overwritten by storing current work area settings inside them.
Operation procedure
Note
The settings read out from banks are retained after the power is turned OFF.
Related information
For settings relating to writing and reading-out, refer to "5-6 Bank Mode."
■
■
■
Long press
for 2 s
Select
Cancel
Commit
