6- 25
Note
An indefinite state is held on occurrence of any of the following:
The power is turned ON
The reset input is ON
A sensor head disconnection error or upthrust error (alarm) is canceled
If the input value falls below the self trigger level before settling within the static width, the
controller enters an alarm state. (In the case of the self trigger edge direction being set to UP)
Note that, with this type of self sample hold, the judgment output is not the same as the judgment
value. After the input value exceeds the specified self trigger level (in the case of the self trigger
edge direction being UP), the judgment output is all OFF until the normal measurement value
settles within the specified static width.
When self sample hold is selected, external trigger input has no effect.
Operation procedure
■
■
2 秒長押し
/
/
選択
キャンセル
選択
キャンセル
桁移動
数値変更
選択
キャンセル
選択
キャンセル
選択
キャンセル
桁移動
数値変更
確定
BAS IC
ALL. IN
E XT . IN
E XT . O UT
DIGIT
ANALO G
ANA. HI
ANA. LO
E CO
ALARM
CALC
CO PY
BANK
CALIB
RE S E T
M AINTE
P-H
B-H
P-P
P-P/2
NG-H
S-H
S LF. P-H
SLF. B-H
Long press
for 2 s
Select
Cancel
Cancel
Cancel
Cancel
Cancel
Select
Select
Select
Select
Commit
Shift between
digits
Change numerical
values
Change numerical
values
Shift between
digits
