5- 2
5-2 SUB Display Switching Mode
Normal
measurement
value
Displays a normal measurement value. The displayed value indicates the preset,
measurement direction, lever ratio, or calibration function.
•
While the holding function is being used, this display allows checking of
internal measurement values that are not being held.
Calculation
value (Note 1)
Displays a calculation value.
•
While the calculation and holding functions are being used, this display
allows checking of calculation results that are not being held.
Label
Displays and sets arbitrary values and characters decided by the user.
•
This removes the need to attach physical labels (showing sensor numbers,
etc.) to controllers.
LOW setting
Displays a LOW setting value.
•
This allows simultaneous checking of the judgment value and lower limit
value.
HIGH setting
Displays a HIGH setting value.
•
This allows simultaneous checking of the judgment value and upper limit
value.
Sensor head
measurement
value
Displays a measurement value from the sensor head (absolute position of the
spindle).
•
While the preset or calibration function is being used, this display allows
checking of the absolute position of the spindle.
Note 1: The calculation function is set on a master unit. If the calculation function is set to anything
other than STAND (Difference from standard), CALC is displayed on the master unit only. If
the calculation function is set to STAND (Difference from standard), CALC is displayed on the
slave units, but not on the master unit. If the calculation function is not used, neither the
master nor slave units display CALC.
Basic screen
SUB display switching
Long press for 2 s
Moves cursor
Changes alphanumeric characters
