6- 20
6-2-1-2 Peak Hold Settings
Parameter name
Setting value
Remarks
Measurement mode (MEAS)
Selects a hold mode.
S-H
P-H (Peak hold)
B-H (Bottom hold)
P-P (Peak-to-peak hold)
P-P/2 (Peak-to-peak hold/2)
NG-H (NG hold)
SLF.S-H / SLF.P-H / SLF.B-H
[Default: S-H]
Trigger mode (TRG)
Selects the external trigger input behavior.
HOLD (Hold) / 1SHOT (One shot)
[Default: HOLD]
An external trigger input holds a normal measurement value as the judgment value in accordance with
a specified condition.
The hold behavior can be set using the trigger mode.
Peak hold (Trigger mode: Hold)
While the external trigger input is OFF, the peak value is constantly updated.
While the external trigger input is ON, the peak value is held, and when it is turned OFF, the peak value
is cleared and the device returns to its state of performing constant updates.
Note
When the reset input is turned ON with the external trigger input ON, an indefinite state will be
held.
When the reset input is turned ON with the external trigger input OFF, an indefinite state will be
held for the duration of the specified response time.
In this type of sample hold, the judgment output is the same as the judgment value.
(However, please note that there are some measurement modes for which this is not the case.)
■
■
H IGH 設定値
LO W設定値
TRIG
TRIG表示
H O LD表示
判定出力
（消灯）
（消灯）
HOLD
TRIG
Go
Hi
Go
HIGH setting value
LOW setting value
TRIG
TRIG display
HOLD display
Judgment output
(Light OFF)
