2
- 1
2. Product Overview
2-1 Outline
When connected to a detector, the SA-SD controller can be used to measure size and perform
pass/fail judgments.
Controller
Model
Characteristics
Power supply
Pass/
fail output
Input/output
SA-SD1AP
Master/high performance
Power cable
Yes
NPN
SA-SD1AP-P
Master/high performance
Connected master
Yes
PNP
SA-SD1AC
Slave/high performance
Connected master
Yes
NPN
SA-SD1AC-P
Slave/high performance
Connected master
Yes
PNP
SA-SD1C
Slave/standard type
Connected master
Yes
NPN
SA-SD1C-P
Slave/standard type
Connected master
Yes
PNP
SA-SDNC
Slave/wire-saving type
Connected master
No
−
Connectable detectors (sold separately)
Caution
■
Do not connect this device to any product other than those listed below. Connection to
other products may result in an accident or failure.
Model
Characteristics
Measurement
range
Resolution
Indication
accuracy
SA-S110
High precision/slim type
10 mm
0.1
µ
m
1.0
µ
m
SA-S110/03N
High precision/slim type/low performance
10 mm
0.1
µ
m
1.0
µ
m
SA-S510
Universal slim type
10 mm
0.5
µ
m
2.0
µ
m
SA-S510/03N
Universal slim type/low performance
10 mm
0.5
µ
m
2.0
µ
m
Resolution settings and detector replacement
Resolution varies depending on the detector that is connected. Connection of the detector is detected
automatically. As a result, there is no need to perform the parameter setting procedure required with
previous products.
Be sure to turn off the power before replacing with a different detector, and adjust the new detector and
master prior to use.
Optional parts (sold separately)
Model
Name
Description
SA-SD-SH2M
Detector connection cable
Straight connector: 2 m
SA-SD-SH5M
Detector connection cable
Straight connector: 5 m
SA-SD-SH10M
Detector connection cable
Straight connector: 10 m
SA-SD-SHL2M
Detector connection cable
L-type connector: 2 m
SA-SD-SHL5M
Detector connection cable
L-type connector: 5 m
SA-SD-SHL10M
Detector connection cable
L-type connector: 10 m
■
■
■
