R E V I E W D R A F T # 1 — C I S C O C O N F I D E N T I A L
A-6
Cisco WRP500 Administration Guide
Appendix A Advanced Voice Fields
SIP page
SIP page
You can use the
Voice tab > SIP
page to configure the SIP settings. This page includes the following
sections:
•
“SIP Parameters section” section on page A-6
•
“SIP Timer Values (sec) section” section on page A-8
•
“Response Status Code Handling section” section on page A-9
•
“RTP Parameters section” section on page A-10
•
“SDP Payload Types section” section on page A-10
•
“NAT Support Parameters section” section on page A-11
Voice tab > SIP page >
SIP Parameters section
Max Forward
SIP Max Forward value, which can range from 1 to 255.
The default is 70.
Max Redirection
Number of times an invite can be redirected to avoid an infinite
loop.
The default is 5.
Max Auth
Maximum number of times (from 0 to 255) a request may be
challenged.
The default is 2.
SIP User Agent Name User-Agent header used in outbound requests.
The default is
$VERSION
. If empty, the header is not included.
Macro expansion of $A to $D corresponding to GPP_A to GPP_D
allowed.
SIP Server Name
Server header used in responses to inbound responses.
The default is
$VERSION
.
SIP Reg User Agent
Name
User-Agent name to be used in a REGISTER request. If this value
is not specified, the
SIP User Agent Name
parameter is also used for
the REGISTER request.
The default is blank.
SIP Accept Language Accept-Language header used. There is no default (this indicates
the WRP500 does not include this header). If empty, the header is
not included.