R E V I E W D R A F T # 1 — C I S C O C O N F I D E N T I A L
A-9
Cisco WRP500 Administration Guide
Appendix A Advanced Voice Fields
SIP page
Voice tab > SIP page >
Response Status Code Handling section
Reg Min Expires
Minimum registration expiration time allowed from the proxy in the
Expires header or as a Contact header parameter. If the proxy
returns a value less than this setting, the minimum value is used.
The default is 1.
Reg Max Expires
Maximum registration expiration time allowed from the proxy in
the Min-Expires header. If the value is larger than this setting, the
maximum value is used.
The default is 7200.
Reg Retry Intvl
Interval to wait before the WRP500 retries registration after failing
during the last registration.
The default is 30.
Reg Retry Long Intvl
When registration fails with a SIP response code that does not
match
Retry Reg RSC
, the WRP500 waits for the specified length of time
before retrying. If this interval is 0, the WRP500 stops trying. This
value should be much larger than the Reg Retry Intvl value, which
should not be 0.
The default is 1200.
SIT1 RSC
SIP response status code for the appropriate Special Information
Tone (SIT). For example, if you set the SIT1 RSC to 404, when the
user makes a call and a failure code of 404 is returned, the SIT1
tone is played.
Reorder
or
Busy
tone is played by default for all
unsuccessful response status code for SIT 1 RSC through SIT 4
RSC.
SIT2 RSC
SIP response status code to INVITE on which to play the SIT2
Tone.
SIT3 RSC
SIP response status code to INVITE on which to play the SIT3
Tone.
SIT4 RSC
SIP response status code to INVITE on which to play the SIT4
Tone.
Try Backup RSC
SIP response code that retries a backup server for the current
request.
