Viewing the Cisco RV180/RV180W Status
Viewing the System Summary
Cisco RV180/RV180W Administration Guide
163
8
STEP 3
If applicable, to change a system setting, click its corresponding
Edit
link.
The
System Summary
page displays this information:
System Information
LAN (Local Network) Information
Host Name
The name of the device.
Firmware Version
Current software version the device is running.
Firmware MD5
Checksum
The message-digest algorithm used to verify the
integrity of files.
PID VID
Product ID and vendor ID of the device.
Serial Number
The serial number of the device.
MAC Address
The MAC address of the device.
IPv4 Address
The IP address and subnet mask of the device.
IPv6 Address
The IP address and subnet mask of the device
(shown only if IPv6 is enabled).
DHCP Server
The status of the router’s DHCP server
(enabled or disabled). If it is enabled, DHCP client
machines connected to the LAN port receive their
IP address dynamically.
DHCP Relay
Indicates if the device is acting as a DHCP relay.
DHCPv6 Server
Indicates if the device’s DHCPv6 server is enabled
or disabled. If it is enabled, DHCPv6 client systems
connected to the LAN port receive their IP address
dynamically.
Summary of Contents for RV180
Page 31: ...Introduction Configuration Next Steps Cisco RV180 RV180W Administration Guide 22 1 ...
Page 32: ...Introduction Configuration Next Steps Cisco RV180 RV180W Administration Guide 23 1 ...
Page 67: ...Configuring Networking Configuring IPv6 Cisco RV180 RV180W Administration Guide 58 2 ...
Page 68: ...Configuring Networking Configuring IPv6 Cisco RV180 RV180W Administration Guide 59 2 ...
