Configuring the Firewall
Firewall Configuration Examples
Cisco RV180/RV180W Administration Guide
102
4
•
Web server PC in the DMZ, IP address: 192.168.1.2
•
Access to Web server: (simulated) public IP address 10.1.0.52
Example 4: Block traffic by schedule if generated from specific range of
machines
In this example, you want to block all HTTP traffic on the weekends if the request
originates from a specific group of machines in the LAN having a known range of
IP addresses, and anyone coming in through the Network from the WAN (i.e. all
remote users).
STEP 1
Setup a schedule. Choose
Firewall
> Advanced Settings > Schedules.
STEP 2
Click Add.
STEP 3
Enter the schedule name (for example, “Weekend”).
STEP 4
Under Time, check All Day.
STEP 5
Under Repeat, leave Everyday unchecked.
STEP 6
Check Saturday and Sunday.
STEP 7
Click Save.
Parameter
Value
Connection Type
Inbound
Action
Always Allow
Service
HTTP
Source IP
Single Address
Start
10.1.0.52
Send to Local Server (DNAT IP)
192.168.1.2 (local IP address of your web server)
Rule Status
Enabled
Summary of Contents for RV180
Page 31: ...Introduction Configuration Next Steps Cisco RV180 RV180W Administration Guide 22 1 ...
Page 32: ...Introduction Configuration Next Steps Cisco RV180 RV180W Administration Guide 23 1 ...
Page 67: ...Configuring Networking Configuring IPv6 Cisco RV180 RV180W Administration Guide 58 2 ...
Page 68: ...Configuring Networking Configuring IPv6 Cisco RV180 RV180W Administration Guide 59 2 ...
