Administering Your Cisco RV180/RV180W
Using the Management Interface
Cisco RV180/RV180W Administration Guide
139
7
Configuring User Accounts
The Cisco RV180/RV180W supports two user accounts for administering and
viewing settings: an administrative user (default user name: “cisco”) and a “guest”
user (default user name: “guest”). The guest account has read-only access. You
can set and change the username and password for both the administrator and
guest accounts.
Configuring Password Aging
STEP 1
Choose Administration > Management Interface > User Accounts.
STEP 2
In the Password Aging section, check Enable to enable password aging. Password
aging requires the user to enter a new password after the password has expired.
STEP 3
Enter the password aging time. This is the number of days before the password
expires.
STEP 4
Click Save.
Configuring Usernames and Passwords
STEP 1
Choose Administration > Management Interface > User Accounts.
STEP 2
Click either Edit Admin Settings or Edit Guest Settings.
STEP 3
Enter the new username.
STEP 4
Enter the old password.
STEP 5
Enter the new password. It is recommended that passwords contains no
dictionary words from any language, and are a mix of letters (both uppercase and
lowercase), numbers, and symbols. The password can be up to 30 characters.
STEP 6
Click Save.
Summary of Contents for RV180
Page 31: ...Introduction Configuration Next Steps Cisco RV180 RV180W Administration Guide 22 1 ...
Page 32: ...Introduction Configuration Next Steps Cisco RV180 RV180W Administration Guide 23 1 ...
Page 67: ...Configuring Networking Configuring IPv6 Cisco RV180 RV180W Administration Guide 58 2 ...
Page 68: ...Configuring Networking Configuring IPv6 Cisco RV180 RV180W Administration Guide 59 2 ...
