Setting up End-User Access
Available Access Filters
Cisco Small Business NSS2000 Series Administration Guide
91
5
Available Access Filters
When you configure network filters, determine which protocols can or cannot
access the NSS. To display the list of available filters, click the drop-down arrow
next to the Filter field on the Network Filters page.
•
Allow All: This is the default filter. It tells the NSS to accept traffic via all
supported protocols.
•
Allow CIFS: Allow CIFS filesharing access.
NOTE:
Rejecting versus Dropping Traffic:
When incoming traffic matches a "reject" filter,
the NSS drops the traffic and then sends a
notice to the initiating system of the denial of
service. When incoming traffic matches a "drop"
filter, the NSS drops the traffic but no notice is
sent to the initiating system
