Setting up End-User Access
Integrating Groups from an Active Directory, NTv4, or NIS Domain
Cisco Small Business NSS2000 Series Administration Guide
77
5
STEP 3
Click Edit.
The Edit Group page appears.
STEP 4
Set up the Users in Group list as required. (The single angled bracket "<" or ">"
moves the selection in the direction of the bracket. The double angled bracket "<<"
or ">>" moves the entire list in the direction of the bracket.)
STEP 5
Click Update.
Integrating Groups from an Active Directory, NTv4, or NIS
Domain
When the NSS is joined to an Active Directory, NTv4, or NIS domain, domain
groups only appear on the Shares page (they do not appear in the list of
configured groups). Group membership for imported domain groups are read-
only. The naming conventions use the NetBIOS format with the domain name as a
prefix of the group name. For example, "DOMAINNAME\GroupName".
NOTE:
It is important to set up your User and
Group ID ranges before you join the NSS to an
ADS, NTv4, or NIS domain. After you join the
NSS to a domain, you should not make changes
to the range as this might lead to an ID collision.
