Adding the NSS to your Network
Allowing a VLAN Access to the NSS
Cisco Small Business NSS2000 Series Administration Guide
23
3
•
Link: This shows as "1" for the Ethernet link.
•
VLAN: Enter the ID of the VLAN as it is defined within your network. The
range of valid VLAN IDs is from 1 to 4095.
•
Priority: Select the QoS priority for the VLAN traffic as it is defined for your
network. Valid options range from 0 to 7 (as defined by the IEEE 802.1p
standard). VLAN Ethernet frames contain a three-bit priority tag ranging
from 0 to 7 (where 0 is best effort and 7 is network-critical traffic).
•
Label: Enter a text description for the VLAN (for example, "Data", "Voice",
"Video", etc.). It can be made up of alphanumeric characters. Note that this
description is used solely as a reference within the NSS interface and does
not affect its operation.
STEP 3
Click Add.
The newly added VLAN appears in the VLAN Configuration table. A message
appears to advise that the VLAN does not take effect until you configure the IP
address.
STEP 4
Click OK.
The Network IP page appears. The newly added VLAN appears in the list.
STEP 5
Click Edit for the VLAN you need to configure.
The Network Configuration page appears.
