Setting up End-User Access
Creating a User Profile
Cisco Small Business NSS2000 Series Administration Guide
70
5
STEP 5
Assign a password by entering any valid (ASCII table) characters in the Password
field. The password is required.
STEP 6
To verify the password, re-enter it in the Confirm Password field.
STEP 7
To record the user’s full name, enter it in the Real Name field. This field is optional.
Note that you cannot enter the "/" character in this field.
STEP 8
To record the user’s email address, enter it in the Email Address field. This field is
optional.
STEP 9
Click OK to create the user and exit the New User page. Click Apply to create the
user and then add another new user.
NOTE:
All password changes to end-user
accounts set up through the NSS configuration
pages must be made by the administrator.
