Cisco Linksys WAG310G, User Manual

Page: 79 / 164

Wi-Fi Protected Setup
3425-00669 Rev E 59
Wi-Fi Protected Setup
There are two ways to configure the residential gateway’s wireless settings, manual
and Wi-Fi Protected Setup. For manual configuration, click the
Basic Settings tab
(refer to the Basic Settings (on page 50) section for more information).
Wi-Fi Protected Setup is a feature that makes it easy to set up your wireless network.
If you have devices that support Wi-Fi Protected Setup, then use the following
instructions.
Note: Wi-Fi Protected Setup can only be used for the default wireless network. (The
residential gateway supports up to four wireless networks. The other three can be
configured using the Wireless > Basic Settings screen of the residential gateway’s
web-based utility.)
If you have client devices, such as a wireless adapter, that support Wi-Fi Protected
Setup, then you can use Wi-Fi Protected Setup to automatically configure wireless
security for your wireless network(s).
There are three methods available. Use the method that applies to the client device
you are configuring.
Note: Wi-Fi Protected Setup configures one client device at a time. Repeat the
instructions for each client device that supports Wi-Fi Protected Setup.