Cisco Linksys WAG310G, User Manual

Page: 44 / 164

Chapter 3 Setup
24 3425-00669 Rev E
2 If you are required to use IPoA, then select IPoA (RFC2684 Routed) for the
Connection Type.
3 Enter the values provided by your service provider for the following fields:

Internet IP Address —Enter the Gateway’s IP address, as seen from the
Internet.

Subnet Mask —Enter the Gateway’s Subnet Mask, as seen from the Internet
(including your service provider).

Default Gateway —Enter the IP address of the service provider’s server.

Primary (Required) and Secondary (Optional) DNS —Enter the DNS
(Domain Name System) server IP address(es) provided by your service
provider. At least one is required.
4 Click Add Connection at the bottom of the screen (or click Cancel Changes to
cancel your changes). After the connection has been added, the screen refreshes
with the PVC connection selected.
PPPoE (RFC 2516)
Some DSL-based service providers use Point-to-Point Protocol over Ethernet
(PPPoE) to establish Internet connections. If you are connected to the Internet
through a DSL line, check with your service provider to see if they use PPPoE. If
they do, you will need to enable PPPoE.
Complete the following steps to use the PPPoE option.