Cisco Linksys WAG310G, User Manual

Page: 50 / 164

Chapter 3 Setup
30 3425-00669 Rev E
2 Select for the desired Connection Type for the PVC setup for WAN. The screen
refreshes to display the applicable fields.
3 If your service provider says you are connecting through a dynamic IP address,
select the
Obtain an IP Address Automatically option; then, continue with step
4. Otherwise, skip to step 6.
4 When you select the Obtain an IP Address Automatically option for an IPoE
WAN connection, you can configure the following additional parameters for
DHCP transactions:

Sent DHCP Options button.
a Option Tag —Enter the DHCP Option Tag to be included in the DHCP Sent
request.
b Option Value —Enter the DHCP Option Value to be included in the DHCP
Sent request. The value must be a hexadecimal string to represent a binary
option value. (No check is performed on these values.)
c To add the entry, click Add Option . To cancel your changes and return to the
ADSL screen, click Back to ADSL Setup .

Request DHCP Options button.
a Option Tag —Enter the DHCP Option Tag to be included in the DHCP
request.