Cisco Linksys WAG310G, User Manual

Page: 21 / 164

3425-00669 Rev E 1
Introduction
Thank you for choosing the Cisco
®
Wireless-G ADSL2+ Gateway with
VoIP (WAG310G). The WAG310G combines an ADSL/2/2+ modem,
1 Ethernet WAN port, Wireless-G access point, 4-port Ethernet switch,
USB host port, and an analog telephone adapter (ATA) with 2 FXS
ports and 1 FXO port. The WAG310G can be connected to the Public
Switched Telephone Network (PSTN), which is the network that
traditional phone service uses, so you can make calls using the
traditional service or Voice over IP (VoIP).
You can also use the Residential Gateway to share resources such as
computers and storage. Various security features help to protect your
data and your privacy while you are online. Security features include
WPA2 security, a Stateful Packet Inspection (SPI) firewall, and NAT
technology. Configuring the Residential Gateway is easy using the
provided browser-based utility.
The WAG310G meets the needs of a variety of deployment
architectures with both an Ethernet WAN interface or a high-speed
ADSL/2/2+ interface supporting up to 8 PVCs and support for
advanced features like QoS and IGMP to help create the framework to
enable data, voice and IP video services.
1 Chapter 1
Introducing the WAG310G
In This Chapter

Benefits and Features ............................................................................. 2

What's on the Front Panel? .................................................................... 3

What's on the Back Panel? ..................................................................... 5

About Wi-Fi Protected Setup ................................................................ 7