Cisco Linksys WAG310G, User Manual

Page: 81 / 164

Wi-Fi Protected Setup
3425-00669 Rev E 61
Method #3
Use this method if your client device asks for the Router’s PIN number.
1 Enter the PIN number that appears on your screen. (It is also listed on the Wi-Fi
Protected Setup label on the bottom of the Router.)
Note : This is a unique number. Do not use the number that appears in the
example above.
2 After the client device has been configured, click OK . Then refer back to your
client device or its documentation for further instructions.
At the bottom of the screen, status information for your wireless security is
displayed:
Wi-Fi Protected Setup Simple-Config-State —The status of the Wi-Fi Protected
Setup feature is displayed. The default is “Not configured.” After the Router has
been configured, the status changes to “Configured.”
Network Name (SSID) —The name of the wireless network is displayed.
Security —The security method of the wireless network is displayed.
Encryption —The encryption method, such as TKIP or AES, is displayed.
Passphrase —The passphrase for the wireless security method is displayed. It
acts like a password for access to the wireless network. (For WPA security
methods, the passphrase is also known as a WPA shared key.)
Note: If you have client devices that do not support Wi-Fi Protected Setup, note
the wireless settings, and then manually configure those client devices.