Cisco Linksys WAG310G, User Manual

Page: 53 / 164

Ethernet
3425-00669 Rev E 33
Ethernet
Configure the residential gateway’s Ethernet settings on this screen.
Path: Setup > Ethernet
Note: There are two views available, Basic and Advanced . The default view is Basic.
To display the Advanced View, click Advanced View . To return to the Basic View,
click Basic View .
5th Ethernet Port
Complete the following steps to configure the fifth Ethernet port on your residential
gateway.
Note: If you use the fifth Ethernet port as a WAN port, then the ADSL port is
automatically disabled, and all routing goes to other Ethernet ports.
1 Select the desired Ethernet Connection setting as follows:

To use the fifth Ethernet port as a WAN port, select Use as WAN Port .
Continue with step 2.

To use the fifth Ethernet port as a Local Area Network (LAN) port, select Use
as LAN Port . Skip to step 3.
2 Configure the Ethernet WAN Setup settings that appear:
a Set Connection Shaping —To disable QoS Shaping, select No Shaping . To
shape according to link speed, select Auto (link speed) . To manually enter
the shape rate, select Manual , and then enter the number of kbps in the field
provided.