Cisco Linksys WAG310G, User Manual

Page: 27 / 164

About Wi-Fi Protected Setup
3425-00669 Rev E 7
About Wi-Fi Protected Setup
If you have a client device, such as a wireless adapter, that supports Wi-Fi Protected
Setup, then you can use Wi-Fi Protected Setup to automatically configure wireless
security for your wireless network(s).
Notes:

Wi-Fi Protected Setup can only be used for the default wireless network. (The
residential gateway supports up to four wireless networks. The other three can
be configured using the residential gateway’s web-based utility.)

Wi-Fi Protected Setup configures one client device at a time. Repeat the
instructions for each client device that supports Wi-Fi Protected Setup.
Method 1
Use this method if your client device has a Wi-Fi Protected Setup button.
1 Click or press the Wi-Fi Protected Setup button on the client device. (If Wi-Fi
Protected Setup is an on-screen option, then select it.)
2 Click the Wi-Fi Protected Setup button on the top panel of the residential
gateway.
3 After the client device has been configured, refer back to your client device or its
documentation for further instructions.
Method 2
Use this method if your client device has a Wi-Fi Protected Setup PIN number.
1 Access the residential gateway’s web-based utility.
2 Click the Wireless tab.
3 Click the Wi-Fi Protected Setup tab.
4 Enter the client PIN number in the PIN field on this screen (the residential
gateway’s Wi-Fi Protected Setup screen).
5 Click Register .
Method 3
Use this method if your client device asks for the residential gateway’s PIN number.
1 Enter the PIN number listed on the label on the bottom of the residential
gateway.
2 After the client device has been configured, refer back to your client device or its
documentation for further instructions.