Cisco Linksys WAG310G, User Manual

Page: 39 / 164

ADSL
3425-00669 Rev E 19
Path: Setup > ADSL (Basic or Advanced View)
Complete the following steps to setup a PVC.
1 From the Select PVC Connection field, select the connection you want to
configure.
2 Check the Enable Now checkbox to enable this connection.
Note: By default, only PVC 1 is enabled. The other seven PVCs are disabled. You
must enable them before configuring layer 3 connections on top of them.
3 Click the Save PVC button.
4 Go to the Connection Type (on page 21) section to configure this connection.
VC Settings
The Virtual Circuit (VC) settings are available in the Advanced View link of the
ADSL screen.
Path: Setup > ADSL (Advanced View)
Complete the following steps to configure the VC settings.
1 For the Multiplexing field, select LLC or VCMUX , depending on your service
provider. The default is LLC.
2 From the QoS Type drop-down menu, select one of the following options:

CBR (Constant Bit Rate) to specify fixed bandwidth for voice or data traffic

UBR (Unspecified Bit Rate) for applications that are not time-sensitive, such
Internet access for WEB browising, loading files, and e-mail