Cisco Linksys WAG310G, User Manual

Page: 58 / 164

Chapter 3 Setup
38 3425-00669 Rev E
DHCP Options
DHCP Options settings are configurable and passed to WAG310G client requests. A
maximum of 15 DHCP Options can be entered for a local network or each
Conditional Serving entry.
Complete the following steps to configure DHCP Options.
1 Click the DHCP Options button (available only if DHCP is enabled). A new
window appears.
2 Configure the following parameters per the guidelines provided:

DHCP Option —The following DHCP options are supported: 1, 3, 6, 12, 15,
43, 43, 51, 54, 56, 58, 59, 121, 125 and 128.

DHCP Option Value —This value is stored as binary string on the Gateway.
For some DHCP options, the user can enter a native format such as an IP
Address or integer; for others, the user must enter HEX strings to represent
binary string of a DHCP option. (No check is performed on these values.)
3 Click Save Settings to apply your changes, or click Go Back to cancel your
changes and return to the Local Network screen.
Conditional Serving
Conditional Serving Pool settings are configurable and passed to WAG310G client
requests.
Complete the following steps to configure the Conditional Serving Pool settings
(available only if DHCP is enabled).
1 Click the Conditional Serving button. A new window appears.
2 Configure the Conditional Serving Pool parameters:
a Enable DHCP Conditional Serving —To enable this option, select the check
box. Otherwise, leave the check box blank.
b For each entry, the table lists the following: MAC Address, Vendor Class ID,
User Class ID, Client ID, Host Name, Domain Name, IP Address, Precedence,
and Action.
c To delete an entry, click Delete . To configure the DHCP options for an entry,
click DHCP Option .
3 Configure the Conditional Serving Entry parameters:

Precedence —Enter the Precedence value. A lower value indicates higher
priority.

MAC Address —Enter the MAC Address, if applicable as a filter condition.

Vendor Class ID —Enter the Vendor Class ID, if applicable as a filter
condition.

User Class ID —Enter the User Class ID, if applicable as a filter condition.