Cisco Linksys WAG310G, User Manual

Page: 111 / 164

Internet Access Policy
3425-00669 Rev E 91
Create or Modify an Internet Access Policy
Complete the following steps to create a new policy or modify an existing policy.
1 In the Access Policy Rule section of the screen, select a policy from the Internet
Access Policy drop-down menu.
a If you are setting up a new policy, select Add New Rule . If you select an
existing policy, the screen refreshes with that policy's settings.
Note: Multiple rules can be created for the same computer. Rules have
priorities, so the first matched rule determines the computer’s access policy.
b From the Status field, select the Enabled radio button to enable the policy, or
Disabled to disable the policy.
c In the PC (IP or Host) Name field, enter the host name or IP address of the
computer for which this policy applies.
2 In the Access restriction section, click the appropriate option, Deny or Allow ,
depending on whether you want to block or allow Internet access for the PCs
you listed on the List of PCs screen.
3 If you wish to block access to websites, use the Website Blocking by Keyword
or Website Blocking by Regular Expression feature.

To use Website Blocking by Keyword, enter the URL or Domain Name of the
websites you wish to block.
Note : If any of these Keywords appears in the URL of a website, access to the
site will be blocked. Note that only the URL is checked, not the content of
each web page.