Getting Started
Out-Of-Band Port
1
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
14
The initial page displayed depends on the “Do not show this page on startup”
option in the Getting Started page
.
If you did not select this option, the initial page
is the Getting Started page
.
If you did select this option, the initial page is the
Out-Of-Band Port
The switch supports an Out-of-Band (OOB) port. This port is used for the
management network. The out-of-band and the in-band ports share the same IP
routing table, therefore you cannot use the same subnet on both in-band and out-
of-band interfaces.
The IP address assigned to this port cannot be assigned to the in-band ports at
the same time. In addition, the IP address assigned to the OOB port must not
belong to any IP subnet configured at the in-band interfaces of the devices.
By default, the OOB port is configured with the default IP address 192.168.1.254.
This default IP address is used when no other address was assigned (dynamically
or statically). This sub net is a reserved one and cannot be assigned on the in-
band interfaces.
