IP Configuration: RIPv2
Configuring RIP
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
375
17
•
Default Route Advertisement
—This option is defined globally in the
page. You can use the global definition or define this field for the
specific interface. The following options are available:
-
Global
—Use the global settings defined in the
RIPv2 Properties
.
screen.
-
Disable
—On this RIP interface, do not advertise the default route.
-
Enable
—Advertise the default route on this RIP interface.
•
Default Route Advertisement Metric
—Enter the metric for the default route
for this interface.
•
Authentication Mode
—RIP authentication state (enable/disable) on a
specified IP interface. The following options are available:
-
None
—There is no authentication performed.
-
Text
—The key password entered below is used for authentication.
-
MD5
—The MD5 digest of the key chain selected below is used for
authentication.
•
Key Password
—If
Text
was selected as the authentication type, enter the
password to be used.
•
Key Chain
—If
MD5
was selected as the authentication mode, enter the key
chain to be digested. This key chain is created as described in the
section.
