Cisco 350XG series, Administration Manual

Page: 469 / 625

Security: 802.1X Authentication
Overview
Cisco 350XG & 550XG Series 10G Stackable Managed Switches 453
20
Common Tasks
Workflow 1: To enable 802.1x authentication on a port:
STEP 1
Click Security > 802.1X/MAC/Web Authentication > Properties.
STEP 2
Enable Port-based Authentication.
STEP 3
Select the Authentication Method .
STEP 4
Click Apply , and the Running Configuration file is updated.
STEP 5
Click Security > 802.1X/MAC/Web Authentication> Host and Session.
STEP 6
Select the required port and click Edit.
STEP 7
Set the Host Authentication mode.
STEP 8
Click Apply , and the Running Configuration file is updated.
STEP 9
Click Security > 802.1X/MAC/Web Authentication > Port Authentication.
STEP 10
Select a port, and click Edit .
STEP 11
Set the Administrative Port Control field to Auto.
STEP 12
Define the authentication methods.
STEP 13
Click Apply , and the Running Configuration file is updated.
Full
multi-
sessions Frames are
re-mapped to
the guest
VLAN Frames
are re-
mapped to
the guest
VLAN
unless
they
belongs to
the
unauthent
icated
VLANs Frames are
dropped Frames
are
dropped
unless
they
belongs
to the
unauthent
icated
VLANs Frames are
re-mapped to
the RADIUS
assigned
VLAN Frames
are re-
mapped
to the
Radius
VLAN
unless
they
belongs
to the
unauthent
icated
VLANs Frames are
bridged based
on the static
VLAN
configuration Frames
are
bridged
based on
the static
VLAN
configurat
ion
Unauthenticated Traffic Authenticated Traffic
With Guest VLAN Without Guest VLAN With Radius VLAN Without Radius VLAN
Untagged Tagged Untagged Tagged Untagged Tagged Untagged Tagged