Security: SSH Client
Change User Password on the SSH Server
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
497
23
•
IP Address Type
—If the SSH server IP address is an IPv6 address, select
the IPv6 address type. The options are:
-
Link Local
—The IPv6 address uniquely identifies hosts on a single
network link. A link local address has a prefix of FE80, is not routable, and
can be used for communication only on the local network. Only one link
local address is supported. If a link local address exists on the interface,
this entry replaces the address in the configuration.
-
Global
—The IPv6 address is a global Unicast IPV6 type that is visible and
reachable from other networks.
•
Link Local Interface
—Select the link local interface from the list of
interfaces.
•
Server IP Address/Name
—Enter either the IP address of the SSH server or
its name, depending on what was selected in
Server Definition
.
•
Fingerprint
—Enter the fingerprint of the SSH server (copied from that
server).
STEP 4
Click
Apply
. The trusted server definition is stored in the Running Configuration
file.
Change User Password on the SSH Server
To change the password on the SSH server:
STEP 1
Click
Security
>
SSH Client
> Change User Password on SSH Server.
STEP 2
Enter the following fields:
•
Server Definition
—Define the SSH server by selecting either
By IP
Address
or
By Name
. Enter the server name or IP address of the server in
the
Server IP Address/Name
field.
•
IP Version
—If you selected to specify the SSH server by IP address, select
whether that IP address is an IPv4 or IPv6 address.
•
IPv6 Address Type
—If the SSH server IP address is an IPv6 address, select
the IPv6 address type. The options are:
