Administration: Discovery
Configuring LLDP
Cisco 350XG & 550XG Series 10G Stackable Managed Switches
135
9
In addition, an administrator can instruct the device to automatically generate and
advertise a network policy for voice application based on the voice VLAN
maintained by the device. Refer the Auto Voice VLAN section for details on how
the device maintains its voice VLAN.
To define an LLDP MED network policy:
STEP 1
Click
Administration
>
Discovery - LLDP
>
LLDP MED Network Policy.
This page contains previously-created network policies.
STEP 2
Select Auto for LLDP-MED Network Policy for Voice Application if the device is to
automatically generate and advertise a network policy for voice application based
on the voice VLAN maintained by the device.
NOTE
When this box is checked, you may not manually configure a voice
network policy.
STEP 3
Click
Apply
to add this setting to the Running Configuration file.
STEP 4
To define a new policy, click
Add
.
STEP 5
Enter the values:
•
Network Policy Number
—Select the number of the policy to be created.
•
Application
—Select the type of application (type of traffic) for which the
network policy is being defined.
•
VLAN ID
—Enter the VLAN ID to which the traffic must be sent.
•
VLAN Type
—Select whether the traffic is Tagged or Untagged.
•
User Priority
—Select the traffic priority applied to traffic defined by this
network policy. This is the CoS value.
•
DSCP Value
—Select the DSCP value to associate with application data
sent by neighbors. This informs them how they must mark the application
traffic they send to the device.
STEP 6
Click
Apply
. The network policy is defined.
NOTE
You must manually configure the interfaces to include the desired
manually-defined network policies for the outgoing LLDP packets using the
LLDP MED Port Settings.
